Autonics Photo Sensor, Through Beam, 3m Sensing, Light On, PNP Output, 12-24 VDC
- Brand: AUTONICS
- Product Code: BPS3M-TDTL-P
- Availability: In Stock
$100.00
BPS Series features flat shape for easy installation and waterproof structure rated by IP67. Also, despite its small size, this series has powerful sensing capabilities to a sensing distance of up to 3m.
Main features
● Easy to mount by Flat type
● Realization of 3m sensing distance as small size
● Protection structure IP67(IEC standard)
| Model | BM3M-TDT | BM1M-MDT | BM200-DDT | |
| Sensing type | Through-beam | Retroreflective | Diffuse reflective | |
| Sensing distance | 3m | 0.1 to 1m † 1 | 200mm † 2 | |
| Sensing target | Opaque materials of Min. Ø8mm | Opaque materials of Min. Ø60mm | Translucent, Opaque materials | |
| Hysteresis | - | Max. 10% at rated settingdistance | ||
| Response time | Max. 3ms | |||
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | |||
| Current consumption | Max. 45mA | Max. 40mA | ||
| Light source | Infrared LED(940nm) | |||
| Sensitivity adjustment | Fixed | Adjustable VR | ||
| Operation mode | Dark ON | Light ON(Dark ON: Option) | ||
| Control output | NPN open collector output • Load voltage : Max. 30VDC • Load current : Max. 100mA • Residual voltage : Max. 1V |
|||
| Protection circuit | Reverse polarity protection | |||
| Indication | Operation indicator: red LED | |||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | |||
| Noise resistance | ±240V the square wave noise(pulse width : 1µs) by the noise simulator Dielectric strength | |||
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute | |||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |||
| Shock | 500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times | |||
| Environment | Ambient illumination | Sunlight : Max. 11,000lx Incandescent lamp : Max. 3,000lx(Receiver illumination) | ||
| Ambient temperature | -10 to 60°C, storage : -25 to 70°C | |||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | |||
| Material | Case : ABS, Sensing part: Acryl(Retroreflectlve: PC) | |||
| Cable | Ø4, 3-wire, Length : 2m(Emitter of through-beam type: Ø4, 2-wire, Length : 2m) (AWG22, Core diameter : 0.08mm, Numner of cores : 60, Insulator out diameter : Ø1.25) |
|||
| Acce-ssories | Individual | - | Reflector(MS-2) | VR adjustment driver |
| Common | Mounting bracket, Bolts/nuts | |||
| Approval | CE | |||
| Unit weight | Approx. 170g | Approx. 105g | Approx. 88g | |
| Document download |  |
|||
† 2: It is for Non-glossy white paper(200×200mm)
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
Dimensions
| Model | NPN open collector output | BPS3M-TDT | BPS3M-TDTL |
| PNP open collector output | BPS3M-TDT-P | BPS3M-TDTL-P | |
| Sensing type | Through-beam | ||
| Sensing target | Opaque materials of Min. Ø5mm | ||
| Operation mode | Dark ON | Light ON | |
| Sensing distance | 3m | ||
| Response time | Max. 1ms | ||
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | ||
| Current consumption | Max. 20mA | ||
| Light source | Infrared LED(850nm) | ||
| Control output | NPN or PNP open collector output • Load voltage: Max. 30VDC • Load current: Max. 100mA • Residual voltage - NPN: Max. 1V, PNP: Max. 2.5V |
||
| Protection circuit | Reverse polarity protection, Output short-circuit protection | ||
| Indicator | Emitter : Power indicator(Red LED), Receiver : Operation indicator(Red LED) | ||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||
| Noise resistance | ±240V the square wave noise(pulse width:1µs) by the noise simulator | ||
| Dielectric strength | 1,000VAC 50/60Hz for 1minute | ||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||
| Shock | 500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times | ||
| Environment | Ambient illumination | Sunlight : Max. 11,000lx , Incandescent lamp : Max. 3,000lx(Receiver illumination) | |
| Ambient temperature | -25 to 65°C, storage : -25 to 70°C | ||
| Ambient humidity | 35 to 85%RH, storage : 35 to 90%RH | ||
| Protection | IP67(IEC standard) | ||
| Material | Case : PC | ||
| Cable | Ø3, 3-wire, Length : 2m(Emitter of through-beam type : Ø3, 2-wire, Length : 2m) (AWG24, Core diameter : 0.08mm, Number of cores : 40, Insulator out diameter : Ø1) |
||
| Approval | CE | ||
| Unit weight | Approx. 66g | ||
| Document download | |
||
Dimensions
Connections
