Autonics Photo Sensor, Diffuse Reflective, Light & Dark On, 700mm Sensing, Relay Output, Autonics Timer, 24-240V AC/DC
- Brand: AUTONICS
- Product Code: BX700-DFR-T
- Availability: In Stock
$121.00
BX Series has built-in timer function enabling selection of ON Delay, OFF Delay and One-shot Delay using a switch. This type can perform superior sensing performance by built-in sensitivity adjustment VR. Also, user convenience was enhanced by introducing a wide range of power supply.
Main Features
● Built-in sensitivity adjustment VR
● Timer : ON Delay, OFF Delay, One-shot Delay
● NPN/PNP open collector output(DC power type)
● Self-diagnosis function (Green LED is lighted in stable level.)
● Built-in reverse power polarity protection and overcurrent protection circuits
● Wide range of power supply : Universal between 24-240VDC/24-240VAC
● Waterproof structure : IP66(IEC standard)
| Model | Standard type | BX15M-TFR | BX5M-MFR | BX3M-PFR | BX700-DFR |
| With Timer | BX15M-TFR-T | BX5M-MFR-T | BX3M-PFR-T | BX700-DFR-T | |
| Sensing type | Through-beam | Retroreflective (Standard type) |
Retroreflective (Built-in polarizing filter) |
Diffuse reflective | |
| Sensing distance | 15m | 0.1 to 5m(MS-2)† 1 | 0.1 to 3m(MS-3)† 2 | 700mm† 3 | |
| Sensing target | Opaque materials of Min. Ø15mm | Opaque materials of Min. Ø60mm | Translucent, opaque material |
||
| Hysteresis | - | Max. 20% at ratedsetting distance | |||
| Response time | Max. 20ms | ||||
| Power supply | 24-240VAC ±10% 50/60Hz, 24-240VDC ±10%(Ripple P-P:Max. 10%) | ||||
| Power consumption | Max. 3VA | ||||
| Light source | Infrared LED(850nm) | Red LED(660nm) | Infrared LED(940nm) | ||
| Sensitivity adjustment | Built-in the adjustment VR | ||||
| Operation mode | Selectable Light ON or Dark ON by switch | ||||
| Control output | Relay contact output(Contact capacity : 30VDC 3A, 250VAC 3A at resistive load, Contact composition: 1c)† 4 | ||||
| Relay life cycle | Mechanically : Min. 50,000,000, Electrically : Min. 100,000 | ||||
| Self-diagnosis output | Green LED turns on at stable operation | ||||
| Timer function | Selectable ON Delay, OFF Delay, One Shot Delay by slide switch [Delay Time : 0.1 to 5sec.(Adjustable VR)] | ||||
| Indicator | Operation indicator : yellow LED, Self-diagnosis indicator : green LED | ||||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||||
| Insulation type | Double or strong insulation(Mark: , Dielectric voltage between the measured input and the power: 1.5kV) | ||||
| Noise resistance | ±1,000V the square wave noise(pulse width : 1µs) by the noise simulator | ||||
| Dielectric strength | 1500VAC 50/60Hz for 1minute | ||||
| Vibration | Mechanical | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |||
| Malfuntion | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10 minutes | ||||
| Shock | Mechanical | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | |||
| Malfuntion | 100m/s2(approx. 10G) in each of X, Y, Z directions for 3 times | ||||
| Environment | Ambient illumination | Sunlight : Max. 11,000lx, Incandescent lamp : Max. 3,000lx (Receiver illumination) | |||
| Ambient temperature | -20 to 55°C, storage : -25 to 70°C | ||||
| Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | ||||
| Protection | IP66(IEC standard) | ||||
| Material | Case, Lens cover: PC, Sensing part: Acrylic | ||||
| Accessor | Individual | - | Mirror(MS-2) | Mirror(MS-3) | - |
| Common | VR adjustment driver, Mounting bracket, Bolts, Nuts | ||||
| Approval | CE | ||||
| Unit weight | TFR: Approx. 225g TFR-T: Approx. 226g |
MFR: Approx. 130g MFR-T: Approx. 131g |
PFR: Approx. 148g PFR-T: Approx. 149g |
DFR: Approx. 115g DFR-T: Approx. 116g |
|
| Document download |  |
||||
† 2: When using the MS-2 reflector, the sensing distance is 0.1 to 2m. The sensor can detect under 0.1m.
† 3: It is for Non-glossy white paper(200×200mm)
† 4: Relay contact output 1a type is option.
† Relay contact output 1a type is option.
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.
Connections
