Power Controller, Single Phase, 5 Selectable Control Inputs, 3 Output Modes, 35 Amp Out, 220 VAC
- Brand: AUTONICS
- Product Code: SPC1-35-E
- Availability: In Stock
$167.00
| Model | SPC1-35 | SPC1-50 | |
| Power supply | 220VAC 50/60Hz | ||
| Allowable voltage range | 90 to 110% of rated voltage | ||
| Maximum rated current | 35A(Single phase) | 50A(Single phase) | |
| Control power | 220VAC | ||
| Control range | Phase control: 0 to 98%, Cycle control: 0 to 100% | ||
| Application load | Resistance load(Min. load : Over 5% of rated current) | ||
| Cooling method | Natural cooling | ||
| Control circuit | Mlcom control type | ||
| Control input | • 1-5VDC • DC4-20mA(250Ω) • ON/OFF(external relay contact or 24VDC) • External VR(1kΩ) • Output limit input(front OUT ADJ. VR) | ||
| Control type | By selection S/W | • Phase control† 1 • Cycle control(zero cross)-Period 0.5sec., 2.0sec., 10sec.† 1 • ON/OFF control(zero cross) | |
| Starting type | Soft start(0 to 50 sec. variable) | ||
| Display | Output indication(LED) | ||
| Insulation resistance | 100MΩ(at 500VDC megger) | ||
| Dielectric strength | 2000VAC for 1 minute | ||
| Noise strength | ±2kV the square wave noise(pulse width : 1µs) by the noise simulator | ||
| Vibration | Mechanical | 0.75mm amplitude at frequency of 10 to 55Hz(for 1 min.) In each of X, Y, Z directions for 1hour | |
| Malfunction | 0.5mm amplitude at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 10min. | ||
| Shock | Mechanical | 300m/s²(approx. 30G) in each of X, Y, Z directions for 3 times | |
| Malfunction | 100m/s²(approx. 10G) in each of X, Y, Z directions for 3 times | ||
| Environment | Ambient temperature | 0 to 50°C, storage: -25 to 65°C | |
| Ambient humidity | 35 to 85%RH | ||
| Unit weight | Approx. 1kg | ||
| Document download |  | ||
† Environment resistance is rated at no freezing or condensation.