Autonics Motion controller, 2-Axis Control, RS232 Interface, programmable 32 steps, 24VDC power voltage
- Brand: AUTONICS
- Product Code: PMC-2HS-232
- Availability: In Stock
$597.00
| Model | PMC-1 HS-232 | PMC-1 HS-USB | PMC-2HS-232 | PMC-2HS-USB | |
| Control axis | 1-Aixs | 2-Aixs (Each axis can be independently programmed) | |||
| Motor for control | Pulse string input stepping motor or servo motor | ||||
| Power supply | 24VDC ±10% | ||||
| Power consumption | Max. 6W | ||||
| Operation mode | Scan / Continuous / Index / Program | ||||
| Positioning type | Absolute position / Incremental position | ||||
| Index step numbers | 64 indexes per each axis | ||||
| Positioning range | -8,388,608 to 8,388,607(Available pulse scaling function) | ||||
| Drive speed numbers | 4EA | ||||
| Drive speed | 1 pps to 4 Mpps(1 to 8,000 x Magnification 1 to 500) | ||||
| Output pulse type | 2 Pulse output(Llne driver) | ||||
| Home search mode | High speed near home search(Stepl) -> Low speed home search(Step2) -> Low speed encoder Z-phase search(Step3) -> High speed offset movement(Step4) Configuring the detection method and Enable/Disable in each step. |
||||
| Program function | Memory | EEPROM | |||
| Step | 64 Steps | ||||
| Control | ABS, INC, HOM, UP, OUT, OTP, JMP, REP, RPE, END, TIM, NOP(12 EA) | ||||
| Start | Power ON program auto-start function | ||||
| Home search | Power ON home search auto-start function | ||||
| Teaching unit (Sold separately) | Adding operation mode, parameter, program drive handling (Scan operation, program execution, home search, etc) |
||||
| Common output | 1 point | 2 point | |||
| Control interface | Parallel l/F | ||||
| Environ-ment | Ambient temperature | 0 to 45°C | |||
| Ambient humidity | 35 to 85%RH | ||||
| Accessory | Common | User Manual & CD | |||
| Power connector | CN1 : MC1,5/2-ST-3.5(PHOENIX) 1EA | ||||
| RS232C connector | CN2 : RS-232C communication cable(1.5m) 1EA | ||||
| P l/F connector | CN3 : 20P MIL standard, 2.54mm connector 1EA | ||||
| X axis input/ output connector | CN4 : 16P MIL standard, 2.54mm connector 1EA(2HS : 2EA) | ||||
| Y axis input/ output connector | - | CN5 : 16P MIL standard, 2.54mm connector 1 | |||
| USB connector | - | USB communication cable(1m) 1EA | - | USB communication cable(1m) 1EA | |
| Unit weight | Approx. 96g | Approx. 102g | |||
| Document download |  |
||||