Autonics Fiber Optic Amplifier, Auto Tune, NPN Output, 12-24 VDC (fiber req'd)
- Brand: AUTONICS
- Product Code: BF4R
- Availability: In Stock
$78.00
BF4R, a high performance fiber optic amplifier, features a compact structure designed to fit into narrow spaces. This fiber optic amplifier has fast response speed of under 0.5ms, and can be compactly mounted. Also, external synchronization input function, mutual interference protection and self-diagnosis function enhance user experience.
Main Features
● High speed response : Max. 0.5ms
● Auto sensitivity setting(Button setting)/Remote sensitivity setting
● External synchronization input, mutual interference protection, self-diagnosis
● Reverse power polarity and short-circuit(Overcurrent) protection circuit
● Timer function : Selectable None / 40ms OFF Delay timer(fixed) (Standard type, remote sensitivity setting type only)
● Automatically selectable Light ON / Dark ON
● Precise detection of small target and complicated place to install
| Model | Standard type | External synchronization input type | Remote sensitivity setting type | ||||||
| BF4RP | BF4GP | BF4R | BF4G | BF4R-E | BF4G-E | BF4R-R | BF4G-R | ||
| Response frequency | Max. 0.5ms(Frequency 1), Max. 0.7ms(Frequency 2) | ||||||||
| Power supply | 12-24VDC ±10%(Rlpple P-P: Max. 10%) | ||||||||
| Current consumption | Max. 45mA | ||||||||
| Light source (modulated light) |
Red | Green | Red | Green | Red | Green | Red | Green | |
| Sensitivity adjustment | Sensitivity adjustment button(ON/OFF) | ||||||||
| Operation mode | Automatic selection of Light ON/Dark ON accordance with button setting | ||||||||
| Control output | NPN or PNP open collector output • Load voltage: Max. 30VDC • Load current: Max. 100mA • Residual voltage - NPN: Max. 1V(load current: 100mA), Max. 0.4V(load current:16mA) / PNP: Max. 2.5V |
||||||||
| Self-diagnosis output | ON state under unstable sensing(When the target stays for 300ms in unstable area), ON state when control output short-circuited |
||||||||
| • Load voltage: Max. 30VDC • Load current: Max. 50mA • Residual voltage - NPN: Max. 1V(load current: 50mA), Max. 0.4V(load current:16mA) / PNP: Max. 2.5V |
|||||||||
| Protection circuit | Reverse power polarity, short-clrcult(overcurrent) protection circuit | ||||||||
| Indicator | Operation indicator: Red LED, Stability Indicator: Green LED ON when the target stays in stable sensing level | ||||||||
| Input of stop transmission function | - | Built-in | - | ||||||
| External synchronization function | - | Bullt-ln(Gate/Trigger) | - | ||||||
| Remote sensitivity setting function | - | - | Built-in | ||||||
| Interference prevention function†1 | Built-in differential frequency mode (set by frequency 1 or 2 by ON/OFF button) | ||||||||
| Timer function (selectable) | Built-in OFF delay timer, Approx. 40ms fixed | - | Built-in OFF delay timer, Approx. 40ms fixed | ||||||
| Ambient illumination | Sunlight : Max. 11,000lx, Incandescent lamp : Max. 3,000lx(Receiver illumination) | ||||||||
| Noise resistance | ±240V the square wave noise(pulse width : 1µs) by the noise simulator | ||||||||
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute | ||||||||
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | ||||||||
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | ||||||||
| Shock | 500m/s²(approx. 50G) in each of X, Y, Z directions for 3 times | ||||||||
| Environment | Ambient illumination | Sunlight : Max. 11000lx, Incandescent lamp : Max. 3000lx (received illumination) | |||||||
| Ambient temperature | -10 to 50°C, storage : -20 to 70°C | ||||||||
| Ambient humidity | 35 to 85% RH, storage :35 to 85% RH | ||||||||
| Material | Case : Heat-resistance ABS, Cover : PC | ||||||||
| Cable | Ø4, 4-wire, Length: 2m (AWG22, Core diameter: 0.08mm, Number of cores: 60, Insulator out diameter : Ø1.25) |
Ø4, 6-wire, Length: 2m (AWG24, Core diameter: 0.08mm, Number of cores: 40, Insulator out diameter : Ø1) |
|||||||
| Accessory | Mounting bracket, Bolts/nuts | ||||||||
| Approval | CE | ||||||||
| Unit weight | Approx. 65g | ||||||||
| Document download |  |
||||||||
† The temperature or humidity mentioned in Environment indicates a non freezing or condensation environment.