Autonics Photo Sensor, Diffuse Reflective, 50mm Sensing, Light On, Autonics Timer, NPN Output, 12-24VDC
- Brand: AUTONICS
- Product Code: BYD50-DDT-T
- Availability: In Stock
$62.00
BY Series is a highly reliable photoelectric sensor that allows fast response time of up to 1ms. It also minimizes malfunctions caused by extraneous light with synchronizing emitter and receiver. Its compact size allows narrow space installation possible to increase user convenience.
Main Features
● Small size : W12×H16×D30mm
● Minimizing malfunction by extraneous light by synchronizing emitter and receiver
● Reverse power polarity and overcurrent protection circuit
● Fast response speed : Max. 1ms
| Model | Standard type | Side sensing type |
| BY500-TDT | BYS500-TDT | |
| Sensing type | Through-beam | |
| Sensing distance | 500mm | |
| Sensing target | Opaque materials of Min. Ø5mm | |
| Response time | Max. 1ms | |
| Power supply | 12-24VDC ±10%(Ripple P-P : Max. 10%) | |
| Current consumption | Max. 30mA | |
| Light source | Infrared LED(940nm) | |
| Operation mode | Dark ON | |
| Control output | NPN open collector output • Load voltage : 30VDC • Load current : Max. 100mA • Residual voltage : Max. 1V |
|
| Protection circuit | Reverse polarity protection, output short-circuit protection | |
| Indicator | Operation Indicator : red LED | |
| Insulation resistance | Min. 20MΩ(at 500VDC megger) | |
| Noise resistance | ±240V the square wave noise(pulse width : 1µs) by the noise simulator | |
| Dielectric strength | 1,000VAC 50/60Hz for 1 minute | |
| Vibration | 1.5mm amplitude or 300m/s2 at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |
| Shock | 500m/s2(approx. 50G) in each of X, Y, Z directions for 3 times | |
| Environ-ment_Ambient illumination | Sunlight : Max. 11,000lx Incandescent lamp : Max. 3,000lx(Receiving illumination) | |
| Environment Ambient temperature | -10 to 60°C, storage : -25 to 70°C | |
| Environ-ment_Ambient humidity | 35 to 85%RH, storage : 35 to 85%RH | |
| Protection | IP50(IEC standard) | |
| Material | Case : ABS, Sensing part : Acrylic | |
| Cable | Ø4, 4-wire, Length : 2m (Emitter of through-beam type: Ø4, 3-wire, Length: 2m) (AWG22, Core diameter: 0.08mm, Nunber of cores: 60, Insulator out diameter: Ø1.25) |
|
| Accessory | Mounting bracket, Bolts/Nuts | |
| Unit weight | Approx. 150g | |
| Document download |  |
|
Dimensions
Connections
