Autonics Encoder, Incremental, 30mm Hollowshaft, 60 PPR, Quadrature & Index NPN Output, 12-24 VDC
- Brand: AUTONICS
- Product Code: E80H30-60-3-N-24
- Availability: 2-3 Days
$292.00
Hollow shaft type Incremental Rotary Encoder E80H can be installed to various tools including motors without any coupling with inner shaft diameter of Ø30mm and Ø32mm in order to increase user convenience.
Main Features
● Diameter ø80mm, Inner diameter of shaft ø30mm, ø32mm(Customizable)
● Allows to install directly at motor or machinery without coupling
● Power supply : 5VDC, 12-24VDC ±5%
● Various output types
| Item | Diameter ø80mm hollow shaft type of incremental rotary encoder | |||
| Resolution(P/R) ¶ 1 | 60, 100, 360, 500, 512, 1024, 3200 | |||
| Electrical specification | Output phase | A, B, Z phase (Line driver : A, A(bar), B, B(bar), Z, Z(bar) phase) | ||
| Phase difference of output | Phase difference between A and B : T/4 ± T/8 (T=1cycle of A phase) | |||
| Control output | Totem pole output | • Low - Load current:Max. 30mA, Residual voltage : Max. 0.4VDC • High - Load current:Max. 10mA, Output voltage(Power voltage 5VDC):Min. (Power voltage-2.0)VDC, Output voltage(Power voltage 12-24VDC):Min. (Power voltage-3.0)VDC |
||
| NPN open collector output | Load current: Max. 30mA, Residual voltage : Max. 0.4VDC | |||
| Voltage output | Load current: Max. 10mA, Residual voltage : Max. 0.4VDC | |||
| Line driver output | • Low - Load current : Max. 20mA, Residual voltage : Max. 0.5VDC • High - Load current : Max. -20mA, Output voltage : Min. 2.5VDC |
|||
| Response time (Rise/Fall) | Totem pole output | Max. 1µs | • Measuring condition - Cable length : 2m, I sink = 20mA | |
| NPN open collector output | ||||
| Voltage output | ||||
| Line driver output | Max. 0.5µs | |||
| Max. Response frequency | 200kHz | |||
| Power supply | • 5VDC ±5%(Ripple P-P:Max. 5%) • 12-24VDC ±5%(Ripple P-P:Max. 5%) |
|||
| Current consumption | Max. 80mA(dlsconnection of the load), Line driver output: Max. 50mA(disconnection of the load) | |||
| Insulation resistance | Min. 100MΩ(at 500VDC megger between all terminals and case) | |||
| Dielectric strength | 750VAC 50/60Hz for 1 minute(Between all terminals and case) | |||
| Connection | Cable type, 250mm connector cable type | |||
| Mechanical specification | Starting torque | Max. 200gf·cm(0.02N·m) | ||
| Moment of inertia | Max. 800g·cm²(8×10-5 kg·m²) | |||
| Shaft loading | Radial : 5kgf, Thrust : 2.5kgf | |||
| Max. allowable revolution ¶ 2 | 3600rpm | |||
| Vibration | 1.5mm amplitude or 300m/s² at frequency of 10 to 55Hz(for 1 min.) in each of X, Y, Z directions for 2 hours | |||
| Shock | Max. 75G | |||
| Environment | Ambient temperature | -10 to 70°C, storage : -25 to 85°C | ||
| Ambient humidity | 35 to 85%RH, storage : 35 to 90%RH | |||
| Protection | IP50(IEC standard) | |||
| Cable | ø5, 5-wire, Length : 2m, Shield cable(Line driver output : ø5, 8-wire) (AWG24, Core diameter : 0.08mm, Number of cores : 40, Insulator out diameter : ø1) |
|||
| Accessory | Spring bracket | |||
| Unit weight | Approx. 560g | |||
| Approval | CE (Except for line driver output) | |||
| Document download |  |
|||
¶ 2: Make sure that. Max response revolution should be lower than or equal to max. allowable revolution when selecting the resolution.
[Max. response revolution(rpm)= Max. response frequency / Resolution × 60 sec]
¶ Environment resistance is rated at no freezing or condensation.
Dimensions
Connections
